Are PetSafe transmitters interchangeable?

Are PetSafe transmitters interchangeable?

In this article, we'll discuss some of the most common brands and which dog collars work with which transmitters. The short answer is yes, many dog fence collar receivers are interchangeable.

Can I add a collar to my PetSafe system?

Yes. There is no limit to the number of pets you can contain with the containment system. It's as simple as purchasing an additional compatible receiver collar for each pet. You can purchase additional receiver collars online or contact our Customer Care Center.

What collars work with PetSafe underground fence?

Yes, a few of the PetSafe® In-Ground Fence™ Extra Receiver Collars will work with this system. They include the Deluxe In-Ground UltraLight Receiver Collar, the Stubborn Dog In-Ground Receiver Collar and the Elite In-Ground Little Dog Receiver Collar.

Will other collars work with Invisible Fence?

Do other collars work with Invisible Fence? For the most part there is no compatibility between brands. So the Innotek IUC-4100 collar will not work with any other system, and in particular will not work with an Invisible Fence system. The single exception is the SportDog and PetSafe.

How do I reset my PetSafe transmitter?

How do I re-synchronize my wireless system?

1. Remove the receiver collar from your pet.
2. Remove the battery from the receiver collar. ...
3. At the transmitter, move the boundary switch from the low to the high position.
4. Slowly adjust the boundary control dial up to #8, down to #1 and then back to the #4 position.

How do I know what PetSafe system I have?

Locate the model number underneath the strap on the front of the collar. It should read 300-2653.

Why does my PetSafe collar not work?

Take battery out of the collar for several minutes and replace it with new battery. Make sure battery is installed properly. Make sure the tab within the battery housing unit is making good contact. ... If receiver collar still does not activate – remove a wire from the transmitter, try to change the levels.

How do I know which PetSafe collar I have?

Collar compatibility check

1. On the bottom of the collar. Near the probes. Underneath the strap. The probes may need to be removed to see the model number.
2. On the bottom of the collar. On the inside of the collar near the probes. Underneath the strap.

What dog collars work with Invisible Fence?

The Perimeter Technologies Computer Receiver Collar is designed to replace your Invisible Fence brand R21 collar or add a new pet to your existing Invisible Fence system for a fraction of the cost. The Perimeter Computer Receiver Collar will work with your existing Invisible Fence brand 7K or 10K dog fence system.

How long do invisible fence collars last?

If your pet's collar correction level is set too high, this could lead to your pet becoming afraid of your yard and contribute to bad behaviors. How long does the Invisible Fence wire last? Invisible Fence boundary wire is a direct burial grade wire and has a life expectancy of 27 years left undisturbed in the ground.

Are there any Pet Stop collars that are interchangeable?

All Pet Stop receiver collars are compatible with the transmitters from the following Invisible Fence models: You can check out all the replacement parts at Pet Stop here. You can find extra nylon replacement collars on Amazon. There’s a variety of brand name and generic models to choose from.

Which is collars are compatible with which systems?

Which collars are compatible with which systems? Which collars are compatible with which systems? Many of our collars and systems are compatible. Check your system for a list of compatible collars below. Note that wireless collars and transmitters aren't compatible with in-ground systems and collars.

Are there any dog collars that work with extreme dog fence?

If your existing dog fence wire and receiver collar aren’t both made by Extreme Dog Fence then it won’t work. SportDog underground fence transmitters are compatible with the following PetSafe In-Ground Receiver Collars: Sport Dog collars are not compatible with transmitters by other brands.

Are there replacement collars for Invisible Fence collars?

Pet Stop replacement parts were designed to be compatible with the Invisible Fence brand line of invisible fences. All Pet Stop receiver collars are compatible with the transmitters from the following Invisible Fence models: You can check out all the replacement parts at Pet Stop here. You can find extra nylon replacement collars on Amazon.